How to Fix IP address conflict Windows 10, 8.1 and 7

Windows PC disconnected from Network, displaying an error message Windows has detected an IP address conflict. Another computer on this network has the same IP address as this computer.  Contact your network administrator for help resolving this issue. This error indicates that there is another host on your LAN with the same IP address. Let’s understand the issue, and how to fix Windows IP address conflict on windows 10, 8.1 and 7.

Windows IP address conflict

When you connect your computer, printer, smartphone, or any other devices to a local network, all the devices will get a unique IP address. For them who don’t, know IP Address, is a Unique Identity of the computer gets when it connects to a network. Or a numerical label assigned to each device connected to a computer network that uses the Internet Protocol for communication.

There are two types of IP address, it can be either static or dynamic. A static IP address is manually assigned and it never changes. On the other hand, the dynamic IP address is automatically assigned every time your computer connects to the Internet or router and is only temporary.

Now let’s talk about IP address conflict, When two computers on the same network end up with the same IP address, this will result IP conflict. It can then lead to both computers being unable to connect to the internet. And Results “There is an IP address conflict with another system on the network”

Fix IP address conflict Windows 10

Whenever you face network and internet connection problems, we recommend restarting network devices include your PC. This should fix if any temporary glich causing the problem.

Disable Antivirus and VPN (if configured)

Change network configuration

The first thing to check is to see if your Windows system is actually configured for DHCP or static IP address. Or Set Windows for automatically obtain IP address and DNS from DHCP server. This must probably fix Windows IP conflict problem.

  • Press Windows + R, type ncpa.cpl and ok
  • This will open network connections window,
  • Right click on the active network adapter, select properties.
  • select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
  • Here select radio button “Obtain an IP address automatically” and “Obtain DNS server address automatically.”
  • Click ok and close everything.

obtain IP address automatically

Flush DNS and Reset TCP/IP configuration

Now open the command prompt as administrator,

Perform command below one by, hit enter key each

  • netsh winsock reset
  • netsh int ip reset
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /flushdns

Reset TCP/ IP configuration

Close command prompt and restart windows Check there is no more problem with network and internet connection.

Run network adapter troubleshooter

  1. Search for “troubleshooting” and select troubleshoot settings
  2. Here look for and select network adapter and run the troubleshooter,
  3. After that run the internet troubleshooter,
  4. Restart windows after complete the troubleshooting process, check the problem solved.

Run Network adapter Troubleshooter

Disable IPv6

Also, some users suggest disabling IPv6 help them to resolve the windows IP address conflict problem.

  • Press Windows + R, type ncpa.cpl and ok
  • Right click on the active network adapter, select properties,
  • Here uncheck Internet Protocol Version 6 (TCP/IP)
  • Click OK then click Close. Reboot your PC to save changes

Disable IPv6

Did these solutions help to fix Windows IP address conflict problem? Let us know on comments below, Also read:

One Reply to “How to Fix IP address conflict Windows 10, 8.1 and 7”

  1. So what do I do if none of these work? The netsh says it can’t do anything because of disconnected media and IPv6 only works temporarily.

Leave a Reply

Your email address will not be published.